DreamLineShowers.com
|
12
Freestanding Tub Installation Manual
TOUBLESHOOTING
Water accumulates around the drain and the bathtub does not completely empty.
• Check that the installation is leveled and that the bathtub is well supported by the legs . With the
help of level, place at the bottom of the bathtub, make sure to have a slight slope towards the
drain . If necessary, adjust the legs under the bathtub .
Bottom of bathtub moves during use.
• Bathtub is not sitting firmly on its base; adjust leveling legs .
Polyethylene film will not come off.
• Use hair dryer to blow hot air on the surface .
MAINTENANCE
Regular disinfections provide an effective defense against various types of bacteria susceptible
of developing in the deposits that build up over time in all bathtubs and showers .
For daily maintenance cleaning, use a moist cloth and gentle liquid detergent .
Do not use
abrasive cleaners, scrapers, metal brushes, or any items or products that could
scratch or dull the surface .
Paint stains:
Use either turpentine or a paint thinner .
Joint compound:
Use a plastic or wood spatula covered with a damp cloth . Do not use a metal blade or a metal
brush .
If a rubber mat is used, it must be removed immediately after each use. Ignoring this
recommendation will cause damage not covered by the warranty.
Certain types of therapeutic products when added to bath water, or if applied non-diluted
directly in the bath, may damage the unit finish .
Test the product on a small inconspicuous
surface prior to use.
TROUBLESHOOTING
