DreamLineShowers.com
|
10
Freestanding Tub Installation Manual
STEP 5 |
Bathtub Preparation and Installation
(CONTINUED)
5.2
Check me!
5.3
Check me!
Top view
Add two spacers (example 2x4) on the skirt ends
and position the bathtub inside the skirt . Attach the
hot and cold water riser to the plumbing hoses .
Faucet must be connected to 1/2" flexible hoses
of sufficient length to allow the bathtub to be
lifted if needed (25" or 635mm).
Apply a silicone seal under the apron (optional) .
According to bathroom flooring, use proper screws
(not included) to secure the skirt to the floor.
Skirt
Silicone
Make sure the skirt is level .
