4
EN
SYMBOLS
Protection class II
Prohibited actions
Carefully read the operating
instructions
Important note
Warning
Children under 3 years old not
allowed
Do not use folded or creased
Do not insert pins or needles
Wash at maximum 40° C with a
mild process
Do not bleach
Tumble drying possibile at low
temperature
Do not dry clean
Do not iron
DESCRIPTION OF THE APPLIANCE
Refer to the illustrative drawing at the beginning of this instructions booklet to verify your appliance equipment.
1. blanket connector
4. underblanket
2. control connector
5. label
3. mains socket
6. control unit
POSITIONING AND FITTING INSTRUCTIONS
POSITIONING THE UNDERBLANKET DIAGRAM (D)
WARNING! The underblanket must only be placed on top of
the mattress. Do not use as an Overblanket.
•
Open the folded blanket and place on your mattress, leaving room for pillows. Smooth out any packing
folds. Lay the electric underblanket (4) on the mattress without putting it underneath the pillows.
• Make sure that it is smoothly spread out (Diagram [B]).
• Secure the blanket to the mattress with the mains lead at the pillow end (Diagram [D]). Pass the
short cord B under the mattress and tie securely through the loop on the other side of the blanket.
The long cord A should be passed under the adjacent corner of the mattress, up through the centre
loop, down and under the other corner of the mattress, and tied securely through the loop on the
other side of the blanket. Repeat this procedure for cord C.
• Lay the bottom sheet (Diagram [B]) on the top of the electric underblanket, then finish making the
bed as normal with a sheet and duvet.
• Frequently check to see that your blanket is properly secured to the mattress and does not ruck up.
USE
WARNING! DO NOT use this appliance if there are visible
signs of damage.
