GB
5
never wring the throw.
DrYING
1.
Tumble dry on low settings.
2. Air dry on a clothes line, but do not use clothes pegs on the wired area of the throw
as they may damage it.
3. DO NOT use your throw until it is completely dry.
No BLEACh
Do not iron
STrETChING
1. The throw must be stretched back to approximately its original size during the drying
process. This is best done whilst damp, working from side to side, stretching a strip at
a time. This procedure may need to be repeated a few times until fully dry.
2. Inspect the throw to ensure that none of the wires have formed into loops, or become
twisted back on themselves. Holding the throw up to the light will make it easier to
inspect the wires.
3. If any problems with the wires persist after the stretching process, or the throw does
not return to close to its original size, return it along with the control to our Service
Centre for a safety inspection.
STorAGE
when not in use store as follows:
ATTENTIoN!
when storing the appliance, allow it to cool down before folding.
ATTENTIoN!
Avoid creasing the appliance.
ATTENTIoN!
Do not place heavy items on the blanket when in storage, as deep
creases or folds may damage the wiring.
ATTENTIoN!
Do not use any moth proofing chemicals.
TrOUBLE SHOOTING
Summary of Contents for RELAXWELL F2001
Page 1: ...RELAXWELL LUXURY HEATED THROW TYPE F2001 F2002 F2003...
Page 8: ...GB 6...
Page 9: ...GB 7 MI001137 0413 MMYY...
