Dreamland R9005, Manual

Page: 9 / 12

8
EN
end of the drying cycle it must be air-dried to allow it to dry completely.
• Remove the mattress protector from the tumble dryer at the end of the drying cycle
and reshape it to its original size.
• Allow the mattress protector to fully air-dry before using it again.
DRYING IN THE OPEN AIR
• When the mattress protector is spread out to dry on a clothes airer, it must be stretched
so the original size is more or less maintained. This is best done while the mattress
protector is still damp, working alternately on the opposite corners and pulling one
side at a time. You might have to repeat this procedure several times until the mattress
protector is completely dry.
WARNING! Spread out the appliance without using clothes
pegs to avoid damaging it, and leave it to fully dry spread out on
a drying rack that is not exposed to the sun.
• Only use the mattress protector when it’s thoroughly dry.
• Do not iron the mattress protector.
WARNING! Examine the appliance against the light to make sure
the cables are not bent or twisted.
WARNING! Dry the appliance flat without using pegs to avoid damaging
it. Leave it to dry, laid out flat on a clothes airer, not in direct sunlight.
STORING THE MATTRESS PROTECTOR
When not in use, store as follows:
• If the mattress protector has been washed, wait until it’s completely dry;
• Fold it like a normal blanket;
• You are advised to store the mattress protector in the original packaging it was supplied in;
• When storing the appliance, allow it to cool down before folding;
• Put the mattress protector away in a dry place
The fabric may turn yellow over time. This does not have any effect at all on the safety and/or
effectiveness of the product itself.
Examine the appliance and its supply cord frequently for signs of wear or damage.
lf there are such signs or in the case of malfunction, contact an authorised technical
service centre.
MI004055_R90.indd 8 MI004055_R90.indd 8 11/01/22 20:51 11/01/22 20:51