background image

Manhattan Deluxe Manual 

Seat Features:

The seat on your Dreamer Design stroller is equipped with many features for 
parent and child comfort and convenience.

5 Point Harness:

You will want to do a general positioning of the harness before placing your 
passenger in the seat. Once your passenger is in the seat, you will want to 
do a final harness adjustment. 

A.

 

Shoulder Height Adjustment

: Push down on the silver center button 

located between the passenger's knees. While depressing the button, pull 
the webbing completely up through the tunnel that goes up the back of the 
seat. This allows you to position the height of the shoulder straps. Shoulder 
straps should be placed behind the back at shoulder blade level so the 
shoulder straps are wrapping up around the shoulders, not resting just 
above the shoulders.

B. Pelvic strap positioning:

 The pelvic strap slides back and forth on the 

seating area. This strap should be positioned slightly under the passenger’s 
pelvic area to keep the passenger from sliding out of the harness and seat.

C. Girth Adjustment:

 Pull the excess webbing from the height adjustment 

strap through the shoulder straps by pulling the webbing located by the side 
buckle.

D.

 Now you are ready to place your passenger in the stroller. Seat your 

passenger, place their arms through the shoulder straps, double check 
shoulder strap location and make final adjustment. Double check pelvic strap 
placement and make final adjustment. Now clip the side buckles into place. 
Depress the center buckle and pull down on center strap until the harness is 
pulled securely over your passenger. A good fit is reflected in placing 2 fingers 
under the shoulder straps with no more room. 
This initial adjustment process seems lengthy, but now that it is done only 
incremental adjustments will need to be made as your passenger grows or 
wears heavier clothing.

WARNING: 

To avoid serious injury from falling or sliding 

out of the stroller, always use the harness. Never leave 
your passenger unattended while in the stroller.

Seat Recline:

The amount of recline on the seat is adjusted by holding the black plastic 
adjustable clip behind the seat and pulling the strap to make the seat sit 
more upright or further back.

WARNING: 

To avoid serious injury, never use the reclined 

position unless firmness panels are in place. Child may 
slip into leg opening and get hurt.

Summary of Contents for Manhattan Deluxe













Reviews: