5.2 Management
1. Press the
Menu-Button
to open the main OSD menu.
2. With the
Navigation-Buttons
(
NH
) choose the option
“Setup”
and press the
OK-Button
.
3. With the
Navigation-Buttons
(
NH
) choose the option
“System”
and press the
OK-Button
.
4. With the
Navigation-Buttons
(
NH
) choose the option
“Harddisk”
and press the
OK-Button
.
5. With the
Navigation-Buttons
(
NH
) choose the option
“Harddisk setup”
and press the
OK-Button
.
You now can set the duration of time after which the harddisk will be put into standby-mode. You can
select from:
• No standby
• 10 or 30 Seconds
• 1, 2, 5, 10, 20 or 30 Minutes
• 1, 2 or 4 Hours
Once you have selected the desired time press the
OK-Button
or the
green Options-Button
to get back
into the harddisk menu.
5.2.1 Initialization
1. Press the
Menu-Button
to open the main OSD menu.
2. With the
Navigation-Buttons
(
NH
) choose the option
“Setup”
and press the
OK-Button
.
3. With the
Navigation-Buttons
(
NH
) choose the option
“System”
and press the
OK-Button
.
4. With the
Navigation-Buttons
(
NH
) choose the option
“Harddisk”
and press the
OK-Button
.
5. With the
Navigation-Buttons
(
NH
) choose the option
“Initialization”
and press the
OK-Button
.
6. With the
Navigation-Buttons
(
NH
) choose the option
“ST3500820AS - Internal (488.395 GB)”
and press the
OK-Button
. If you have installed another hard disk this option will differ from the
one depicted!
7. By pressing the
red Options-Button
you will initialize (format) the hard disk. After you confirm
the safety question the initialization process starts.
!!! WARNING !!! All data stored on the HDD will be lost.
40
