- 51 -
U s e r M a n u a l D r e a m b o x D M 7 0 2 5
english
8.6 LC-Display
(LCD)
If no OSD menu is visible on your screen, press the
Menu-Button
to open the main OSD
menu. Navigate to the option “Setup” and press the
OK-Button
to select.
Navigate to the option “System” and press the
OK-
Button
.
The “System” menu will open up.
Navigate to the option “LCD” and press the
OK-
Button
.
Using the
Navigation-Buttons left
and
right
you
can set the brightness and contrast of the LCD.
“Standby” set the brightness value for standby.
If “Invert” is set to “Yes” the polarity of the LCD will
change.
All changes will take effect immediately.
Press the
green Options-Button
to save the setting
or the
red Options-Button
to discard them.
You are taken back to the “System“ menu.
