Dream Maker Spas ECLIPSE, Owner'S Manual

Page: 15 / 26

11
SYSTEM OPERATION CONTINUED
The spa is equipped with massage jets, two anti-vortex main drains and an automatic skim filter.
ADJUSTING MASSAGE JETS
The massage jets may be adjusted for both volume and direction.
To adjust the jet for direction simply rotate the jet’s eyeball fitting in the direction
desired.
To adjust the jet’s flow rate, rotate the jet’s outer faceplate about 1/4 turn
counterclockwise to increase the flow or clockwise to decrease the flow. (DO NOT
FORCE)
SUCTION FITTINGS
Keeping the suction fitting covers clean and clear of all obstructions is critical in
order to have a safe operation of the spa. See the safety instructions rules for
details.(page 1)
SURFACE SKIM FILTER
The spa’s automatic surface skim filter is designed to remove floating debris
and contaminants such as body lotions by drawing water through a specially
formulated filter cartridge element. It is critical that this element be routinely
cleaned.
To Clean the Cartridge:
1. Place system on Lockout Mode or disconnect power.
2. Remove the filter cover.
3. Turn cartridge counterclockwise and pull up.
4. Remove the cartridge element and thoroughly rinse with a garden hose until
element is free from dirt and debris.
5. Return the cartridge to the filter well by following steps 1 - 4 in reverse order.
AIR INJECTION VENTURI ADJUSTMENT
Air injection into the massage jet water flow may be controlled by manipulation of the
venturi dials located on either side of the spa. Each dial is independent and controls
up to 5 jets respectively.