Dream Maker Spas ECLIPSE, Owner'S Manual

Page: 10 / 26

6
SYSTEM OPERATION X-SPA and X-CAL
The spa is equipped with massage jets, an anti-vortex main drain and an automatic skim filter.
ADJUSTING MASSAGE JETS
The massage jets may be adjusted for both volume and direction.
To adjust the jet for direction simply rotate the jet’s eyeball fitting
in the direction desired.
To adjust the jets flow rate, rotate the jet’s outer faceplate
about a 1/4 of a turn counterclockwise
to increase the flow or clockwise to decrease the flow. (DO NOT FORCE)
SUCTION FITTING
Keeping the suction fitting clean and clear of all obstructions is critical
in order to have a safe operation of the spa. See the safety rules
for details.
SURFACE SKIM FILTER
The spa’s automatic surface skim filter is designed to remove floating
debris and contaminants such as body lotions by drawing water
through a specially formulated filter cartridge element. It is critical
that this element be routinely cleaned.
To Clean the Cartridge:
1. Shut off pump.
2. Lift the filter well cover lid.
3. Pull up the cartridge.
4. Remove the cartridge element and thoroughly rinse with a garden
hose in clear water until element is free from dirt and debris.
5. Return the cartridge to the filter well and secure by pushing it in
until is seated all the way down.
AIR VENTURI ADJUSTMENT
Air injection into the massage jet water flow may be controlled by
manipulation of the venturi dials located on either side of the spa.
Each dial is independent and controls up to 5 jets respectively.