© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
13
PRISM PLUS with Buttress Shower enclosure manual Ver 1 10/2018
©2018 DreamLine. All Rights Reserved
NOTE:
It is advisable to allow the silicone holding the
Hinge Panel Glass (#02)
in the
U-Channel (72”) (#01)
to
cure before hanging the
Door Glass (#06)
.
!
Fig 8b
13/16” shims
NOTE: These adjustable
hinges are factory set to
overclose.
See
Page 21
for
instructions regarding the
adjustment features of these
hinges.
DO NOT
install the Handle onto the door glass until instructed.
DO NOT
lift the door glass using the Handle. This could result in
damage to the glass and /or serious personal injury. Always use an
assistant or a professional grade glass suction cup when handling
heavy glass
.
!
Fig 9
TIP:
Use a
13/16” shim
beneath the door glass
to help align the
Door Glass (#06)
with the
hinges. This will protect the threshold and the
bottom of the door glass from damage and allow
proper spacing for the
Sweep Vinyl (#08).
(Fig 8b)
!
Leave the shims in place beneath
the door glass while the silicone
cures and while you dry-fit and
install the buttress panel glass.
Install the hinges flush
with the edge of the
Hinge Panel Glass
2
1
hinge panel
hinge panel
outside
outside
2mm hinge
gasket
9.
Attach the
130º Glass-to-Glass Adj Hinge
(#12)
onto the
Hinge Panel Glass (#02)
with the bolts
facing inside the shower
and flush with the edge of the glass. Use one 2mm hinge gasket per side.
Tighten the hinge bolts evenly and snap in the decorative bolt caps. (
Fig 9)
