Certifications
18
8
Certifications
8.1
CE Compliance
ATOM one - Motor Drive
has been shown to comply with the listed technical
standards below. The tests has been done accordingly with the measurement
procedures specified in European Council Directive- EMC Directive
2014/30/EU.
The
ATOM one - Motor Drive
passed the tests performed according to:
•
EN 55022:2011-12 Class B / CISPR 22:2013-09-03
•
EN 55024:2016-05 Class B / CISPR 24:2014-10-08
•
EN 61000-3-2: 2015-03
•
EN 61000-3-3: 2014-03
8.2
For Customers in the U.S.A.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures: Reorient or relocate the receiving antenna. Increase the
separation between the equipment and receiver. Connect the equipment into an
outlet on a circuit different from that to which the receiver is connected. Consult the
dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved in this
manual could void your authority to operate this equipment. The shielded interface
cable recommended in this manual must be used with this equipment in order to
comply with the limits for a computing device pursuant to Subpart J of Part 15 of FCC
Rules.
