61 of 95
Reference Manual ATOM one SSM500
11.9 dpc_auto_load
Automatically detects defect pixels and stores them in the non-persistent memory. Use
dpc_add_pixel
to dump the automatically filled table and
dpc_save
to save it
persistently.
To detect the pixels the device uses the same logic, that is also used for the automatic
defect pixel detection. That means you can vary the amount of pixels detected by adjusting
the
dpc_level
to the desired value. To check which pixels are currently being detected,
set
dpc_mode
to auto-detection and
dpc_test_mode
to validation mode.
