http://dreamcatcher.asia/cw
______________________________________________________________________
ME3000 Analog Electronics
Lab 6 - 16/19
The analog control panel of the interface consists of a vertical control and a horizontal control that are
used to control and set the waveform of the graph display. The vertical control is used to change the
vertical scale and position of the waveform. The soft front panel of the vertical system control is shown
in Figure .
Figure B-4 – Soft Front Panel of the Vertical System Control
1. To display waveform from channel 1 / channel 2, click
1 / 2
or press the shortcut key
F5 / F6
.
2. To toggle the channel on or off, click the channel buttons on the vertical control panel or click
the toolbar to toggle the channel on or off, as shown below.
Figure B-56 – Channel On/Off Mode
3. The channel options provide four types of adjustment to the channel waveform; these options
are
AC Coupling
,
Invert
,
BW Limit
, and
Attenuation (1X, 10X, 100X)
. You may click the
button as shown in Figure to set the channel options.
Figure B-6 – Channel Options
4. The
Volt/Div
control sets the sensitivity of the channel. You can select the channel sensitivity
from the drop-down list.
5. You can also use the
button or
button to increase or decrease the sensitivity of
both channel 1 and channel 2.
