http://dreamcatcher.asia/cw
______________________________________________________________________
ME3000 Analog Electronics
Lab 6 - 1/19
ME3000 Analog Electronics
Lab 6
RF Class A Tuned Amplifiers
This courseware product contains scholarly and technical information and is protected by copyright
laws and international treaties. No part of this publication may be reproduced by any means, be it
transmitted, transcribed, photocopied, stored in a retrieval system, or translated into any language in
any form, without the prior written permission of
Acehub Vista Sdn. Bhd.
The use of the courseware product and all other products developed and/or distributed by
Acehub
Vista Sdn. Bhd.
are subject to the applicable License Agreement.
For further information, see the Courseware Product License Agreement.
Objectives
i)
To demonstrate the practical issues of designing an RF tuned amplifier
ii)
To demonstrate AC measurements on a Class A amplifier
Equipment Required
i)
ME3000-M2 Analog Electronics Training Kit
ii)
Digital Multimeter, recommendation :
Agilent 34405A or U2741A
iii) 50 MHz Oscilloscope or equivalent, recommendation : Agilent DSO1002A 60 MHz or
U2701A
iv) 10 MHz Function Generator or equivalent, recommendation : Agilent 33220A or U2761A
v)
Dual Output (+/- 12V, 0.5A) DC Power Supply, recommendation : Agilent E3631A
Accessories Required
i)
1 x 4-way
power supply cable
ii)
1 x BNC(m)-to-grabber clips coaxial cable
iii) 6 x jumper cables terminated with grabber clips at both ends
iv) 1 x antistatic wrist strap
Caution
:
An electrostatic discharge generated by a person or an object coming in contact with electrical
components may damage or destroy the training kit. To avoid the risk of electrostatic discharge,
please wear the antistatic wrist strap and observe the handling precautions and recommendations
contained in the EN100015-1 standard. Do not connect or disconnect the device while it is being
energized.
