DrBrowns AC178-INTL, Instructions For Use Manual

Page: 7 / 40

5
CLEANING THE APPLIANCE
CAUTION:
Unplug from outlet and allow to cool for 60 minutes before
cleaning� DO NOT IMMERSE IN WATER�
Clean at least once a week when in regular use�
BASE AND HEATING PLATE: Wipe all surfaces with a damp cloth or sponge�
TRAY, LID, LOWER RACK AND MEASURING CUP: Clean in hot, soapy water and rinse
well, or in a dishwasher (top rack only)� Allow to air dry�
Note:
DO NOT use scouring pads, abrasives, bleach or solvents for cleaning�
DO NOT disassemble base� There are no serviceable parts inside�
A
B
Note: If there is not enough water added, incomplete sterilization may occur� If the unit
was not able to sterilize completely, it will beep and the indicator light will flash for one hour�
If this happens,
wait 10 minutes to allow unit to cool , then add water to the solid FILL LINE
of the measuring cup (110 mL), pour the water onto the heating plate and restart the
sterilization cycle�
Dry Only
Press the Dry Only Button � The appliance will beep one time and the drying cycle
will start�
When the drying cycle is complete, the appliance will beep 5 times and
switch off automatically� This cycle lasts approximately 45 minutes�
Note: Any cycle can be stopped at any time by pressing the power button�
CAUTION: If it is necessary to drain water from the base, always
POUR AWAY FROM YOU, as shown by the symbol on base�