4. Position the short neck of the fill opening (with the
reservoir’s flat side up) into the bottom of the slot on the
appliance’s right side. Pivot the reservoir up to a vertical
position and snap into place. (SEE FIGURE 3) Make sure
it’s held firmly in place.
5. The water reservoir will now automatically fill the heating
chamber inside the appliance to the proper level.
NOTE: The Dr. Brown’s Natural Flow
®
Deluxe Bottle Warmer is unique and
convenient because you don’t have to fill the reservoir every time you want to
use it. The translucent reservoir also acts as a gauge. Simply keep your eye on
the fluid level and refill the reservoir when you can no longer see water inside
the reservoir. During each refill, unplug warmer, empty heating chamber and
rinse with clean water. Do not immerse warmer base in water!
6. Insert the polarized plug into a standard 120V wall outlet.
TO PROGRAM THE CYCLE TIME:
The following times are to be used as a preliminary guide only. There are many
variables that can affect how fast this appliance warms a bottle or food container,
such as the size of the container, the exact starting temperature of the contents
and the type of liquid/food being warmed. All of these factors will impact how the
appliance heats the contents and the final temperature that is reached.
When you begin to use this appliance, you will need to make adjustments to the
length of time to achieve the most appropriate final temperature. The appliance
will keep the “last time used” in memory.* Once you determine the best time for
a specific amount of liquid, you can simply insert another bottle and press the
start button.
Note: When restarting an already warm appliance, one (1) minute is
automatically reduced from the “last time used” to prevent over heating of
bottle.
*Disconnecting the appliance from power will clear the “last time used” from memory.
5
FIGURE 3
Summary of Contents for 850T
Page 27: ...27 ...
