background image

VigorTalk ATA 

 

1

1 Introduction 

 

1.1 Brief Overview 

 

The VigorTalk Analog Telephone Adapter(ATA) is an international-recognized SIP 

standard compliance that helps to migrate legacy analog telephones, analog conference 

speakerphones, and fax machines* to modern IP devices and delivers feature-rich 

carrier-class-clear Voice over IP service to small-businesses and residences. The 

VigorTalk ATA enables customers to extend their investment by leveraging the existing 

cable or DSL Internet connection for lower Internet phone rates and all of the other 

available special features from their service provider, such as Caller ID, Call Waiting etc.   

 

With easy-installation for end users and easy-provision/maintenance for service 

providers, the VigorTalk ATA has the capabilities to be large-scale deployed, remote 

managed, and dynamic software upgrades by service provider to offer customized 

services to the users. 

 

To interface between telephones and LAN, the VigorTalk ATA features one standard 

telephone port for connection to the existing phones or fax machines* and one 

10/100Base-T Ethernet port for connection to Internet via router/modem. Besides 

embedded WebGUI for complex advanced configuration, The VigorTalk ATA also 

provides complementary built-in Interactive Voice Response(IVR) system to enable end 

users to quick basic setup via key pad. 

*future release 

 

1.2 Highlights 

 

VoIP 

-Protocol 

SIP(RFC3261), RTP/RTCP 

-G.168, G.165 Line Echo-cancellation 
-Gain Control 
-Voice Codecs:   

G.711 A/µ law ; G.729 A/B 

-Voice Feature:   

VAD

Voice Activity Detection

 

CNG

Comfort Noise Generation

 

Dynamic Jitter buffer 

-DTMF Generation and Detection 
-Packet Loss Concealment 
-Caller ID

Bell core, ETSI FSK mode

-FXS interface 

Networking Features 

-DHCP client

RFC 2131

/PPPoE 

/Static IP /PPTP 

-Automated NAT traversal

STUN, 

RFC3489

 

 

Management 

-Web-based User Interface 
-Firmware upgrade via TFTP

RFC 

1350

 

-Convenient Internet Access Profiles 
-Telephone Keypad Configuration 
-Auto provision

 

Summary of Contents for VigorTalk ATA


















Reviews: