background image

VigorTalk ATA User’s Guide 

 

Copyright Information 

 

Copyright 
Declarations

 

 

Copyright 2005 All rights reserved. This publication contains information that is protected by 
copyright. No part may be reproduced, transmitted, transcribed, stored in a retrieval system, or 
translated into any language without written permission from the copyright holders. 
 

Trademarks

 

 

The following trademarks are used in this document:   
1. Microsoft is a registered trademark of Microsoft Corp. 
2. Windows, Windows95/98/Me/NT/2000/XP and Explorer are trademarks of Microsoft Corp.   
3. Apple and Mac OS are registered trademarks of Apple Computer Inc. 
 
Other products may be trademarks or registered trademarks of their respective manufacturers. 

 

Safety Instructions and Approval 

 

Safety 
Instructions

 

1. Read the installation guide thoroughly before you set up the router. 
2. The router is a complicated electronic unit that may be repaired only be authorized and 

qualified personnel. Do not try to open or repair the router yourself. 

3. Do not place the router in a damp or humid place, e.g. a bathroom. 
4. The router should be used in a sheltered area, within a temperature range of +5 to +40 

Celsius. 

5. Do not expose the router to direct sunlight or other heat sources. The housing and electronic 

components may be damaged by direct sunlight or heat sources. 

6. Keep the package out of reach of children. 
7. When you want to dispose of the router, please follow local regulations on conservation of the 

environment.

 

 

Warranty

 

 

We warrant to the original end user (purchaser) that the router will be free from any defects in 
workmanship or materials for a period of three (3) years from the date of purchase from the 
dealer. Please keep your purchase receipt in a safe place as it serves as proof of date of 
purchase. During the warranty period, and upon proof of purchase, should the product have 
indications of failure due to faulty workmanship and/or materials, we will, at our discretion, repair 
or replace the defective products or components, without charge for either parts or labor, to 
whatever extent we deem necessary tore-store the product to proper operating condition. Any 
replacement will consist of a new or re-manufactured functionally equivalent product of equal 
value, and will be offered solely at our discretion. This warranty will not apply if the product is 
modified, misused, tampered with, damaged by an act of God, or subjected to abnormal working 
conditions. The warranty does not cover the bundled or licensed software of other vendors. 
Defects which do not significantly affect the usability of the product will not be covered by the 
warranty. We reserve the right to revise the manual and online documentation and to make 
changes from time to time in the contents hereof without obligation to notify any person of such 
revision or changes. 

 

European 
Community 

Hereby, we declare that the router is in compliance with the essential requirements and other 
relevant provisions of R&TTE Directive 99/5/EC. 
 

Be A Registered 
Owner 

Web registration is preferred. You can register your Vigor router via 

http://www.draytek.com/

Alternatively, fill in the registration card and mail it to the address found on the reverse side of the 
card. 
 

Firmware & Tools 
Updates 

Due to the continuous evolution of DrayTek ATA technology, all routers will be regularly 
upgraded. Please consult the DrayTek web site for more information on newest firmware, tools 
and documents.

http://www.draytek.com/ 

 

Summary of Contents for VigorTalk ATA


















Reviews: