VigorSwitch G2240 User’s Guide
107
z
A port using the “None“ trunking method or Group ID 0 will be automatically set to
use the “None” trunking method with Group ID 0.
2
2
.
.
1
1
1
1
.
.
1
1
P
P
o
o
r
r
t
t
Function name:
Trunk Port Setting/Status
Function description:
Port setting/status is used to configure the trunk property of each and every port in the
switch system.
Parameter description:
Port :
Port Number: 1-24
Method:
This determines the method a port uses to aggregate with
other ports.
None -
A port does not want to aggregate with any other port
should choose this default setting.
LACP -
A port use LACP as its trunk method to get
aggregated with other ports also using LACP.
Static -
A port use Static Trunk as its trunk method to get
aggregated with other ports also using Static Trunk.
Group:
Ports choosing the same trunking method other than “None”
must be assigned a unique Group number (i.e. Group ID,
valid value is from 1 to 8) in order to declare that they wish
to aggregate with each other.
Active LACP:
This field is only referenced when a port’s trunking method
is LACP.
Active -
An Active LACP port begins to send LACPDU to
its link partner right after LACP protocol entity started to
take control of this port.