VigorSwitch G1260 User’s Guide
43
Subnet mask is used to set the subnet mask value, which
should be the same value as that of the other devices
resided in the same network it attaches.
For more information, please also see the Section 2-1-4
“IP Address Assignment” in this manual.
Default: 255.255.255.0
Fallback Gateway
Set an IP address for a gateway to handle those packets
that do not meet the routing rules predefined in the
device. If a packet does not meet the criteria for other
pre-defined path, it must be forwarded to a default router
on a default path. This means any packet with undefined
IP address in the routing table will be sent to this device
unconditionally.
Default: 192.168.1.1
Management VLAN
Set the management VLAN number.
Password
Set a password for this switch. Up to 16 characters are
allowed in this parameter. Any alphanumeric character is
acceptable.
Default: admin
Auto Logout
Set the auto-logout timer. The valid value is 0, 60 ~
10000 in the unit of minute and a decimal point is not
allowed. The value OFF means auto-logout timer is
disabled.
Default: OFF
