background image

 

Intellectual Property Rights (IPR) Information 

Copyrights 

© All rights reserved. This publication contains information that is protected 

by copyright. No part may be reproduced, transmitted, transcribed, stored in 
a retrieval system, or translated into any language without written permission 

from the copyright holders. 

Trademarks 

The following trademarks are used in this document:   

 

Microsoft is a registered trademark of Microsoft Corp. 

 

Windows, Windows 95, 98, Me, NT, 2000, XP, Vista, 7, 8 and Explorer are 
trademarks of Microsoft Corp.   

 

Apple and Mac OS are registered trademarks of Apple Inc. 

 

Other products may be trademarks or registered trademarks of their 

respective manufacturers. 

Safety Instructions and Approval 

Safety 
Instructions 

 

 

Read the installation guide thoroughly before you set up the router. 

 

The router is a complicated electronic unit that may be repaired only be 

authorized and qualified personnel. Do not try to open or repair the 
router yourself. 

 

Do not place the router in a damp or humid place, e.g. a bathroom. 

 

Do not stack the routers. 

 

The router should be used in a sheltered area, within a temperature 

range of +5 to +40 Celsius. 

 

Do not expose the router to direct sunlight or other heat sources. The 

housing and electronic components may be damaged by direct sunlight or 
heat sources. 

 

Do not deploy the cable for LAN connection outdoor to prevent electronic 
shock hazards. 

 

Keep the package out of reach of children. 

 

When you want to dispose of the router, please follow local regulations on 

conservation of the environment. 

Warranty 

 

We warrant to the original end user (purchaser) that the router will be free 

from any defects in workmanship or materials for a period of two (2) years 
from the date of purchase from the dealer. Please keep your purchase receipt 

in a safe place as it serves as proof of date of purchase. During the warranty 
period, and upon proof of purchase, should the product have indications of 

failure due to faulty workmanship and/or materials, we will, at our discretion, 
repair or replace the defective products or components, without charge for 

either parts or labor, to whatever extent we deem necessary tore-store the 
product to proper operating condition. Any replacement will consist of a new 
or re-manufactured functionally equivalent product of equal value, and will 

be offered solely at our discretion. This warranty will not apply if the product 
is modified, misused, tampered with, damaged by an act of God, or subjected 

to abnormal working conditions. The warranty does not cover the bundled or 
licensed software of other vendors. Defects which do not significantly affect 

the usability of the product will not be covered by the warranty. We reserve 
the right to revise the manual and online documentation and to make changes 

from time to time in the contents hereof without obligation to notify any 
person of such revision or changes. 

 
 

Summary of Contents for VigorLTE 200

















Reviews: