manualshive.com logo in svg

Draytek VigorAP 900, User Manual

Share
Download
Draytek VigorAP 900 User Manual Download Page 134

 

VigorAP 900 User’s Guide

 

124

Disable

 - The encryption mechanism is turned off. 

WEP

 - Accepts only WEP clients and the encryption key 

should be entered in WEP Key. 

WPA/PSK or WPA2/PSK or Mixed (WPA+WPA2)/PSK - 

Accepts only WPA clients and the encryption key should be 
entered in PSK. The WPA encrypts each frame transmitted 
from the radio using the key, which either PSK (Pre-Shared 
Key) entered manually in this field below or automatically 
negotiated via 802.1x authentication. 

WEP/802.1x - 

The built-in RADIUS client feature enables 

VigorAP 900 to assist the remote dial-in user or a wireless 
station and the RADIUS server in performing mutual 
authentication. It enables centralized remote access 
authentication for network management.   

The WPA encrypts each frame transmitted from the radio 
using the key, which either PSK (Pre-Shared Key) entered 
manually in this field below or automatically negotiated via 
802.1x authentication. Select WPA, WPA2 or Auto as WPA 
mode. 

WPA/802.1x - 

The WPA encrypts each frame transmitted 

from the radio using the key, which either PSK (Pre-Shared 
Key) entered manually in this field below or automatically 
negotiated via 802.1x authentication. 

WPA2/802.1x - 

The WPA encrypts each frame transmitted 

from the radio using the key, which either PSK (Pre-Shared 
Key) entered manually in this field below or automatically 
negotiated via 802.1x authentication.

 

WPA Algorithms 

Select TKIP, AES or TKIP/AES as the algorithm for WPA. 
Such feature is available for 

WPA2/802.1x, WPA/802.1x, 

WPA/PSK or WPA2/PSK or Mixed (WPA+WPA2)/PSK

 

mode.

 

 

Pass Phrase 

Either 

8~63

 ASCII characters, such as 012345678..(or 64 

Hexadecimal digits leading by 0x, such as 
"0x321253abcde..."). Such feature is available for 

WPA/PSK 

or WPA2/PSK or Mixed (WPA+WPA2)/PSK

 mode. 

Key Renewal Interval 

WPA uses shared key for authentication to the network. 
However, normal network operations use a different 
encryption key that is randomly generated. This randomly 
generated key that is periodically replaced. Enter the renewal 
security time (seconds) in the column. Smaller interval leads to 
greater security but lower performance. Default is 3600 
seconds. Set 0 to disable re-key. Such feature is available for 

WPA2/802.1,WPA/802.1x, WPA/PSK or WPA2/PSK or 
Mixed (WPA+WPA2)/PSK

 mode. 

PMK Cache Period 

Set the expire time of WPA2 PMK (Pairwise master key) 
cache. PMK Cache manages the list from the BSSIDs in the 
associated SSID with which it has pre-authenticated. Such 
feature is available for 

WPA2/802.1 

mode. 

Pre-Authentication 

Enables a station to authenticate to multiple APs for roaming 

Summary of Contents for VigorAP 900
















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands