Draytek Vigor2930 Series User Manual Download Page 87

Page: 87 / 298

igor2930 Series User’s Guide

This page allows you to bind several IP objects into one IP group.

Set to Factory Default

Clear all profiles.

Click the number under Index column for settings in detail.

Name

Type a name for this profile. Maximum 15 characters are
allowed.

Interface

Choose WAN, LAN or Any to display all the available IP
objects with the specified interface.

Available IP Objects

All the available IP objects with the specified interface chosen
above will be shown in this box.

Selected IP Objects

Click

button to add the selected IP objects in this box.

Summary of Contents for Vigor2930 Series











































































































































































































































































































Search results

Summary of Contents for Vigor2930 Series

Reviews:

Related manuals for Vigor2930 Series

Brands by name

Popular brands

Draytek Vigor2930 Series, User Manual

Search results

Summary of Contents for Vigor2930 Series

Reviews:

Related manuals for Vigor2930 Series

Brands by name

Popular brands