Draytek Vigor2762 series, User Manual

Page: 196 / 651

III-1-9 AP Discovery
III-1-9 AP Discovery
Vigor router can scan all regulatory channels and find working APs in the neighborhood.
Based on the scanning result, users will know which channel is clean for usage. Also, it can
be used to facilitate finding an AP for a WDS link. Notice that during the scanning process
(about 5 seconds), no client is allowed to connect to Vigor.
This page is used to scan the existence of the APs on the wireless LAN. Yet, only the AP
which is in the same channel of this router can be found. Please click
Scan to discover all
the connected APs.
Available settings are explained as follows:
Item Description
Scan It is used to discover all the connected AP. The results will
be shown on the box above this button.
Statistics It displays the statistics for the channels used by APs.
Add to If you want the found AP applying the WDS settings, please
type in the AP’s MAC address on the bottom of the page and
click Bridge or Repeater. Next, click
Add to . Later, the MAC
address of the AP will be added to Bridge or Repeater field
of WDS settings page.
Vigor2762 Series User’s Guide 186