Set the protocol to
PPPoE / PPPoA
.
For ADSL only, set
Encapsulation
to
PPPoA VC MUX
,
VPI
to
0
,
VCI
to
100
.
Click
Next >
Enter the username and password
provided to you by your Internet Service Provider
.
Username
should be in the
form of an email address. The password will need to be entered into both the
Password
and
Confirm Password
fields. Note : All fields are case sensitive. Click
Next >
Confirm your settings and click
Finish
. The router will restart.
Check your connection by logging back in to the router as above with your newly assigned password. Click
Online
Status
then
Physical connection
. Check the
WAN 1 Status
section to be sure you have an
IP
and
GW IP
assigned.
Need help?
We’re available 9:00am to 5:00pm, Monday to Friday.
Phone:
09 415 4182
Email:
Firmware updates are available free of charge from
www.draytek.net.nz
