Version: 1.5
32
UPLINK – The uplink interface with SC connector should be long haul or short haul Gigabits
optical connection.
Subtend – The subtend interface with RJ45 interface is Gigabit Ethernet connection; There are
six interfaces to subtend six slaves to expend DSL capacity.
Figure 2-2. IVD master interface on front panel
From Figure 2-2, we can see that the IVD series has a lot of interfaces. The following section
briefs these interface connection.
Table 2-1. IVD master connection
Port
Type, Color
Connected to
Remarks
Power Cord
Cord, Black
Wire,
AC Outlet/
DC Outlet
100-240VAC
-42 ~ 56VDC
Factory Reset
Push Bottom for Default
Setting
ACO
Push Bottom for reset alarm
Alarm Relay
RJ45 connect to
Buzzer
ALM Relay connection
Serial (Console)
RS232, Grey
PC RS232 port for CLI
--
Uplink (Optical)
SC, Yellow/orange
Gigabits Fiber Optical
Interface Interconnection
--
MGN
RJ-45, Blue
PC Ethernet Interface
Gx
RJ-45 (8P8C), Blue
Connect to slave unit (UP1)
