Version: 1.5
24
Figure 1-11. CPP front panels
The following figures give some examples of scenario for using IVD to combine voice and data
signals.
The existing telephone wiring usually depends on user’s region. Here are descriptions of two
typical installation scenarios. Use telephone wires with RJ-11 jacks on one end for connecting to
the CPP board.
1.5.2.1 Installation CPP Scenario A
Users can connect a cable from RJ-21 (LINE) attached in IVD to the CPP board. Then users can
connect a RJ-11 jack port attached in a CPP to ADSL modem directly. The Data only CPP
connection is shown in Figure 1-12.
Figure 1-12. Data only CPP connection
1.5.2.2 Installation CPP Scenario B
Phone service is available in IVD. You can connect a RJ-11 jack port attached in a CPP to a
telephone directly or applied in the same way shared in ADSL modem. The Data/Voice CPP
connection is shown in Figure 1-13.
RJ11
RJ11
RJ11
RJ11
