Draytek Vigor 3220 SERIES, User Manual

Page: 73 / 708

Vigor2832 Series User’s Guide 61
Access Mode Use the drop down list to choose a proper access mode. The
details page of that mode will be popped up. If not, click
Details Page for accessing the page to configure the settings.
Details Page This button will open different web page (based on IPv4)
according to the access mode that you choose in WAN
interface.
Note that Details Page will be changed slightly based on
physical mode.
IPv6 This button will open different web page (based on Physical
Mode) to setup IPv6 Internet Access Mode for WAN interface.
If IPv6 service is active on this WAN interface, the color of
“IPv6” will become green.
Advanced This button allows you to configure DHCP client options.
DHCP packets can be processed by adding option number and
data information when such function is enabled and
configured.
Enable – Check the box to enable the function of DHCP
Option. Each DHCP option is composed by an option number
with data. For example,
Option number:100
Data: abcd
When such function is enabled, the specified values for DHCP
option will be seen in DHCP reply packets.
Interface – Specify the WAN interface(s) that will be
overwritten by such function. WAN5 ~ WAN7 can be located
under WAN>>Multi-PVC/VLAN.
Option Number – Type a number for such function.
DataType – Choose the type (ASCII or Hex) for the data to be
stored.
Data – Type the content of the data to be processed by the
function of DHCP option.
Info If you choose to configure option 61 here, the detailed settings in WAN>>Internet
Access will be overwritten.