Vigor2950 Series User’s Guide
37
Note: There are two reasons that we have to apply RIP Protocol Control on
1st Subnet. The first is that the LAN interface can exchange RIP packets
with the neighboring routers via the 1st subnet (192.168.1.0/24). The second
is that those hosts on the internal private subnets (ex. 192.168.10.0/24) can
access the Internet via the router, and continuously exchange of IP routing
information with different subnets.
2.
Click the
LAN - Static Route
and click on the
Index Number 1.
Check the
Enable
box. Please add a static route as shown below, which regulates all packets destined to
192.168.10.0 will be forwarded to 192.168.1.2. Click
OK
.
3.
Return to
Static Route
Setup
page. Click on another
Index Number
to add another
static route as show below, which regulates all packets destined to 211.100.88.0 will be
forwarded to 192.168.1.3.
4.
Go to
Diagnostics
and choose
Routing Table
to verify current routing table.
