Vigor2930 Series User’s Guide
48
Press any number under Index to access into next page for configuring port redirection.
Enable
Check this box to enable such port redirection setting.
Mode
Two options (Single and Range) are provided here for you to
choose. To set a range for the specific service, select
Range
. In
Range mode, if the public port (start port and end port) and the
starting IP of private IP had been entered, the system will calculate
and display the ending IP of private IP automatically.
Service Name
Enter the description of the specific network service.
Protocol
Select the transport layer protocol (TCP or UDP).
WAN IP
Select the WAN IP used for port redirection. There are eight WAN
IP alias that can be selected and used for port redirection. The
default setting is
All
which means all the incoming data from any
port will be redirected to specified range of IP address and port.
Public Port
Specify which port can be redirected to the specified
Private IP
and Port
of the internal host. If you choose
Range
as the port
redirection mode, you will see two boxes on this field. Simply type