manualshive.com logo in svg

Draytek Vigor 2930, User Manual, Page: 157 / 216

Share
Download
Draytek Vigor 2930 User Manual Download Page 157

 

Vigor2930 Series User’s Guide 

151

 

Mode 

There are several modes provided for you to choose. 

 

Disable 

- Turn off the encryption mechanism. 

WEP - 

Accepts only WEP clients and the encryption key 

should be entered in WEP Key. 

WPA/PSK - 

Accepts WPA clients and the encryption 

key should be entered in PSK. Remember to select WPA 
type to define either Mixed or WPA2 only in the field 
below. 

WPA2/PSK-

Accepts only WPA2 clients and the 

encryption key should be entered in PSK. 

Mixed (WPA+WPA2)/PSK

 - Accepts WPA and WPA2 

clients simultaneously and the encryption key should be 
entered in PSK and WEP. 

WEP/802.1x - 

Accept WEP clients with 802.1x 

authentication. Since the key will be auto-negotiated 
during authentication, the field of key setting below will 
be not available for input. 

WPA/802.1x - 

Accept WPA clients with 802.1x 

authentication. Since the key will be auto-negotiated 
during authentication, the field of key setting below will 
be not available for input. 

WPA2/802.1x - 

Accept WPA clients with 802.1x 

authentication. Since the key will be auto-negotiated 
during authentication, the field of key setting below will 
be not available for input. 

Mixed (WPA+WPA2)/802.1x

 - Accepts WPA and 

WPA2 clients simultaneously and the encryption key 
should be entered in PSK and WEP.   

Summary of Contents for Vigor 2930

























































































































































































































Reviews:

No comments