Vigor2820 Series User’s Guide
40
Enable/Disable
Click
Enable
for activating this function. If you click
Disable
, this
function will be closed and all the settings that you adjusted in this
page will be invalid.
ISP Access Setup
Enter your allocated username, password and authentication
parameters according to the information provided by your ISP. If
you want to connect to Internet all the time, you can check
Always
On
.
Username
– Type in the username provided by ISP in this field.
Password
– Type in the password provided by ISP in this field.
Index (1-15) in Schedule Setup -
You can type in four sets of time
schedule for your request. All the schedules can be set previously
in
Application – Schedule
web page and you can use the number
that you have set in that web page.
PPP/MP Setup
PPP Authentication
– Select
PAP only
or
PAP or CHAP
for
PPP.
Idle Timeout
– Set the timeout for breaking down the Internet
after passing through the time without any action. This setting is
active only when the
Active on demand
option for Active Mode is
selected in
WAN>> General Setup
page.
IP Address
Assignment Method
(IPCP)
Usually ISP dynamically assigns IP address to you each time you
connect to it and request. In some case, your ISP provides service
to always assign you the same IP address whenever you request.
In this case, you can fill in this IP address in the Fixed IP field.
Please contact your ISP before you want to use this function.
Fixed IP
– Click
Yes
to use this function and type in a fixed IP
address in the box of
Fixed IP Address
.
Default MAC Address
– You can use
Default MAC Address
or
specify another MAC address by typing on the boxes of MAC
Address for the router.
Specify a MAC Address –
Type the MAC address for the router
manually.
After finishing all the settings here, please click
OK
to activate them.
