background image

Installing the DSL Connection on a Standard Telephone Line

Check the socket of your standard telephone 
line.

1.  Your standard telephone line must be 

terminated with a separate socket with 
a single RJ 11 connector (see figure on the 
right). If there are several sockets (parallel 
sockets), find out, which one is the main 
socket (primary). 

2.  If your telephone socket is unsuitable (it has 

a different connector) or if there are other 
sockets connected to it (parallel sockets) 
which cannot be disconnected, contact the 

Fault Reporting Centre at 12129

.

3.  There should not be an alarm (security 

device) connected to your telephone line. 
Switch the alarm off before the installation; 
otherwise the alarm may become 
dysfunctional. Connect the alarm back after 
you have successfully installed the DSL 
connection.

Installation CD

Self-Installation Guide

Installation Package Contents

Cable with RJ 11 connectors 
(designed for connecting 
the telephone socket with 
the DSL splitter)

4

5

The package of DSL router DrayTek Vigor 2600 VGST contains:

 

  installation guide and installation CD

 

 DSL router DrayTek Vigor 2600 VGST

 

 adapter

 

 two external antennas to router

 

 interconnection LAN UTP cable with RJ 45 connectors for 
connecting of the router to a PC

 

 interconnection cable with different connectors for connecting 
of the router with a splitter

DSL splitter

You can install your DSL Connection and DSL router DrayTek Vigor 2600 VGST using the 
enclosed manual or the installation CD Internet. If you chose the latter, insert the enclosed CD 
to your computer’s drive. If the content does not open automatically, launch the 

START.EXE 

programme

 from the CD’s main directory. On the title page, select 

“Inštalácia DSL internetu”

 

from the main menu and then 

“Inštalácia DSL pripojenia”

.

RJ 45 connector 
(bigger and wider)

RJ 11 connector 
(smaller)

There are normally 2 types of 
connectors used:

Suitable 
telephone socket

Unsuitable 
telephone socket

There are normally 2 types of sockets 
used:

> Self-Installation Guide

> DSL router DrayTek Vigor 2600 VGST

Summary of Contents for Vigor 2600 VGST











Reviews: