background image

DRAWMER

FULLY FEATURED MONITOR CONTROLLER FOR STUDIOS OF ALL SIZES.
PRECISE, COMPACT & AFFORDABLE.

The CMC3 Compact Monitor Controller consolidates the feature sets of Drawmer's
3 most popular monitor controllers: Whilst retaining the famed accurate, and
transparent audio quality of the MC2.1, it has the precision and control of the MC3.1
and the low profile, compact design of the CMC2. It is equally at home in a serious
home studio as in a professional recording facility.

Accurate & Transparent

With the same Drawmer pedigree as the MC2.1, the CMC3 circuit is just as
transparent and accurate. It has been designed to remove the limitations that a
passive circuit brings, such as the ability to increase the volume for quiet passages
and improved mix checking, without adding the artifacts that lesser quality active
circuits introduce. You hear exactly what you've recorded!

Precision

The CMC3 supports 3 sets of stereo monitors, plus a dedicated mono speaker/
sub-woofer output, each can be switched individually and simultaneously and in
any order, especially useful for A/B comparisons. You can listen to multiple speakers
with the same sub-woofer, or turn the sub-woofer off altogether.

The volume control utilizes a parallelled custom quad pot for excellent channel
matching and smooth feel, as does the secondary preset volume control on the
front. This provides repeatable calibrated output level for the monitors, so that at
the flick of a switch the engineer can hear the mix at the same predetermined
volume, time after time, without having to meticulously adjust controls.

CMC3

Monitor Controller

4

Summary of Contents for CMC3





















Reviews: