CMC2
- Compact Monitor Controller
CHAPTER 3
SPECIFICATION
Note: These specifications are provisional and
may alter slightly upon product release.
INPUT
Maximum Input Level
21dBu
OUTPUT
Maximum Output Level
before clipping
21dBu
DYNAMIC RANGE
@ unity gain
115dB
CROSSTALK
L/R @ 1kHz
>80dB
THD & NOISE
unity gain 0dBu input
0,002%
FREQUENCY RESPONSE
20Hz-20kHz
+/- 0.2dB
PHASE RESPONSE
20Hz-20kHz
+/- 2degrees
POWER REQUIREMENTS
External Power Supply
Input: 100-240V ~ 50-60Hz, 0.48A MAX.
Output: 15V 1A
Voltage automatically selected by PSU
EMC Standards EN55022:2006+A1:2007 /
EN6100-3-2 / EN6100-3-3
Use only the external PSU supplied by
Drawmer or an accredited partner. Failure to
do so could permanently damage the CMC2
and will also invalidate the warranty.
CASE SIZE
Depth
164mm
Width
183mm
Height
45mm
WEIGHT
1.1kg
For warranty service please call Drawmer
Electronics Ltd. or their nearest authorised
service facility, giving full details of the difficulty.
A list of all main dealers can be found on the
Drawmer webpages. On receipt of this
information, service or shipping instructions
will be forwarded to you.
No equipment should be returned under the
warranty without prior consent from Drawmer
or their authorised representative.
For service claims under the warranty
agreement a service Returns Authorisation
(RA) number will be issued.
W rite this RA number in large letters in a
prominent position on the shipping box.
Enclose your name, addres s, telephone
number, copy of the original sales invoice and
a detailed description of the problem.
Authorised returns should be prepaid and must
be insured.
All Drawmer products are packaged in
specially designed containers for protection.
If the unit is to be returned, the original
container must be used. If this container is not
available, then the equipment should be
packaged in substantial shock-proof material,
capable of withstanding the handling for the
transit.
CONTACTING
DRAWMER
We will be pleased to answer all application
questions to enhance your usage of Drawmer
equipment.
Please address correspondence to:
DRAWMER Electronics LTD
Coleman Street
Parkgate
Rotherham
South Yorkshire
S62 6EL
United Kingdom
Telephone:
+44 (0) 1709 527574
Fax:
+44 (0) 1709 526871
Contact via E-mail:
Further information on all Drawmer products,
dealers, Authorised service departments
and other contact information can be found
on our website:
www.drawmer.com
CMC2 GENERAL INFORMATION
IF A FAULT DEVELOPS
15
