1. Pull out barrel to extended position (see diagram).
2. If desired, pour car wash soap or liquid fertilizer into soap compartment (6oz capacity). Make
sure that the soap/water switch is in the water position before adding soap or fertilizer and
turning on water to the hose.
3. Attach ‘snap-on water stop’ connector (included) for connecting to
1
⁄
2
" standard garden hose
(not included) then connect to the ‘snap-on’ fitting at the base of the water spray gun.
4. Rotate nozzle in either direction to preferred spray pattern. Setting is confirmed by a ‘click’.
Turn on water to the hose.
5. The Tornado spray gun can operate on liquid soap, liquid fertilizer or water. Select desired
setting with switch at the top of the barrel.
6. Squeeze black trigger firmly until it ‘clicks’. The spray gun will now operate without finger
pressure. To stop the water flow, simply press the blue trigger release button.
7. To clean, fill soap compartment with water and keep switch on ‘soap’. Spray water for about
half a minute to rinse out the spray gun.
8. Disconnect hose after use and store spray gun out of direct sunlight.
INSTRUCTIONS
■
The TORNADO high power spray gun is not a toy and is not intended for use by children.
■
Do not aim the spray gun at people or pets.
■
Do not use with hot water.
■
Do not use with any compressor.
■
Maximum suitable water pressure is 120psi.
SAFETY CAUTION
DRAPER HELP-LINE 01703 494344.
