background image

- 13 -

(6)

8.   PREPARING THE ANGLE GRINDER

8.1 FITTING THE AUXILIARY HANDLE – 

FIG.1

For reasons of safety, when working with this type of 

electric power tool, the operator must always use the 

auxiliary handle 

(5)

.

–  Screw the handle clockwise, into one of the two 

threaded apertures best suited to the application 

and user comfort.

Warning! This machine must never be operated 

(cutting off/grinding processes) without the correct 

guard placed correctly and operating fully.

8.2 FITTING THE GUARD – FIG.2

The guard 

(6) 

supplied is designed for grinding only, 

it is not intended to be used for cutting operations. If 

you intend to perform cutting operations with this 

machine, you need to purchase the additional cutting 

guard, which has a more enclosed design to contain 

any fragments if the cutting disc fails.

–  Position the guard onto the grinder collar, rotate 

the guard until it is in the correct position and then 

tighten the screw firmly.

Warning! Never attempt to operate this machine 

without the guard securely fitted and correctly 

positioned*.

* With the exception of wire cup brushes etc. which  

negate the guards effectiveness.

FIG.1

FIG.2

(5)

(6)

Summary of Contents for Storm Force 56457





















Reviews: