WARNING
Improper installation and use of SmartTrim can result in serious injury or death. Primarily, injuries can occur when the SmartTrim falls due to imprecise
installation, mishandling of the SmartTrim during installation or installation on an insufficient wall or ceiling structure. Please use extreme care.
1.
Please read the following installation guidelines thoroughly and follow them carefully. Failure to do so may cause product to fall or otherwise fail, and could result in
serious injury.
2.
Installation and calibration of the SmartTrim should only be performed by an authorized, qualified, and experienced professional. In particular, electrical work and
wiring [indicated in diagram by dashed lines] must be completed only by a qualified professional electrician who has read this manual completely and is familiar with
the construction and operation of this equipment and the hazards involved.
3.
Turn off power and any nearby equipment or cables carrying electricity before connecting switches, wires, controls, or electrical components.
4.
Do not affix the unit to wall or ceilings that have inadequate strength to permanently hold the unit during use. It is the owner’s and installer’s responsibility to confirm
the wall to which the unit attaches is sufficient to permanently hold the weight and stress loads of the unit at all times. Draper, Inc., is not responsible for improper
installation, application, testing or workmanship related to the product at place of installation.
5.
It is the installer’s responsibility to make sure appropriate fasteners are used for mounting.
6.
All brackets and other hardware must be installed level. SmartTrim must be level and square.
7.
Never leave the area while operating the SmartTrim during installation, maintenance, or normal operation, unless it is secure and safe.
8.
Before testing or operation, carefully inspect the entire area and areas underneath to be sure no persons or objects are in the area.
9.
During testing or operation, carefully watch the surrounding area for any potential safety concerns including nearby persons or objects.
10.
After installation, the entire system should be carefully tested to ensure safe and normal operation.
Extreme care should be taken during testing to remain clear of moving parts to avoid possible injury.
11.
Installation and maintenance of SmartTrim should be performed only by authorized and qualified personnel, who have been trained in the safe and effective
operation of the SmartTrim & understand its safety features.
12.
The safety features of the SmartTrim should never be disabled, bypassed or overridden.
The system should not be operated until all safety features are properly and completely installed, calibrated and tested.
13.
SmartTrim may need to comply with local, state or district rules and regulations, in particular when installed in schools.
All applicable rules and regulations should be reviewed before installation and use.
14.
Failure to precisely follow installation guidelines invalidates all warranties.
15.
Custom products/installations may not be reflected in this manual.
Call Draper, Inc., if you have questions about the installation of custom products or any questions about your installation.
Before Beginning Installation
1.
Look for any job site conditions that could interfere with installation or operation of the system.
2.
Read carefully and be sure to understand all installation instructions and all related operations manuals. These instructions are intended to as a guide for the
installer and owner. They should be followed closely and combined with the expertise of experienced qualified installers. Draper, Inc., is not responsible for
improper installation, application, testing or workmanship related to the product at place of installation. Please retain all instructions for future use.
3.
Open cartons lengthwise.
4.
Locate and lay out all pieces.
5.
Inspect all boxes to make sure you have received the proper SmartTrim and parts.
6.
If you have any difficulties with installing, servicing or operating your SmartTrim, call your dealer or Draper, Inc., 765 987-7999.
Important Safety Information
SmartTrim™ for
UniSee
®
Section 1 -
Personnel and Tools Required
PERSONNEL REQUIRED
TOOLS REQUIRED
No. 5 HEX WRENCH
Barco Unisee
Service Tool
OR
Summary of Contents for SmartTrim
Page 8: ......
