background image

The lamp can be suspended and swivel 360° on hook located on the rear of the lamp 

 or the 

magnet 

 located on the base of the lamp.

11.  EXPLANATION OF SYMBOLS

11.1 EXPLANATION OF SYMBOLS

12.  DISPOSAL

9. INSPECTION 

LAMP 

INSTRUCTION

9.1 OPERATION

CAUTION:

 Never shine the LED light directly into your or any one else’s eyes.

To run through the sequence of modes (UV LED, 3 Watt COB on high, on low and off).

Press the on/off 

 button.

The lamp can be suspended by the magnet 

 located on the base of the lamp.

- 8 -

- 9 -

9.2 INSPECTION LAMP OPERATION

The inspection lamp is operated via the ON/OFF/ beam setting switch 

 

Press once for lower powered beam.

 

Press twice for full powered beam.

 

Press three time for UV beam.

 

Press again to switch off the inspection lamp.

Warning!

 This inspection lamp is extremely bright. Do not shine directly into any person’s or 

animal’s eyes.

1
2
3
4

× 3

1

2

4

3

10. MAINTENANCE

10.1 MAINTENANCE

Use only mild soap and a damp cloth to clean this inspection lamp. Do not submerge into liquid.

Lithium-ion product.

Refer to your local authority for 
advice on disposal and recycling.

For indoor use only. 

Do not expose to rain.

WEEE
Do not dispose of Waste Electrical & 
Electronic Equipment in with domestic 
rubbish.

Class II construction (Double 
insulated).

Short-circuit-proof safety 
isolating
transformer.

Non-self-resetting protective 
device.

Polarity indication.

Rated voltage.

Warning! Read the instruction 
manual.

230V charger adaptor

Do not incinerate or throw onto 
fire.

Warning! Do not aim beam at 
bystanders or look directly into 
light source.

12.1 DISPOSAL

At the end of the machine’s working life, or when it can no longer be repaired, ensure that it 
is disposed of according to national regulations.

Contact your local authority for details of collection schemes in your area.

In all circumstances:

–  Do not dispose of power tools with domestic waste.

–  Do not incinerate.

–  Do not abandon in the environment.

–  Do not dispose of WEEE* as unsorted municipal waste.

12.2 HEALTH AND SAFETY FOR BATTERIES

Warning!

 Do not put in fire or mutilate – cells may burst of release toxic materials.

–  Do not short circuit cells, may cause burns.

–  The battery must be removed from the appliance before it is scrapped.

–  The battery is to be disposed of safely.

–  Do not mutilate batteries, corrosive electrolyte will be released.

–  Do not incinerate – danger of explosion and release of toxic fumes.

–  Do not dispose of batteries or cells in a charged condition.

Expired lithium-ion batteries must be recycled/disposed of in accordance with the 
appropriate regulation or legislation. They should be returned to your local warranty 
agent/stockist.

*  Waste Electrical & Electronic Equipment.

UV

Summary of Contents for Slimline 65421













Reviews: