background image

FIG. 5

3. GUARANTEE

11. MAINTENANCE

17

4

11.1 BASIC MAINTENANCE AND CHECKS

Note:

 Remove the plug from the socket before carrying out adjustment, servicing or 

maintenance.
In order to maintain the compressor to its optimum, periodical service checks must be 
carried out routinely. Allowances should be made to adjust the time scale for machines in 
occasional service with the exception of the safety valve which must be inspected by a 
qualified service agent every 12 months regardless of use.

Note:

 Where necessary, ear defenders and safety goggles must be worn.

Daily checks:

–  Before every use check the airline/regulator/separator.
–  After every use adjust the line pressure back to zero.

11.2  DRAINING MOISTURE FROM THE    
TANK – FIG. 5

The drain cock 

 is located on the underside of 

the compressor. Use this valve to drain moisture 
from the tank daily to reduce the risk of corrosion.
–  Reduce the tank pressure below 10psi.
–  Drain moisture from the tank by opening the    
  drain cock located underneath the tank.

3.1 GUARANTEE

Draper tools have been carefully tested and inspected before shipment and are guaranteed 
to be free from defective materials and workmanship.
Should the tool develop a fault, please return the complete tool to your nearest distributor 
or contact: 

Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF. England. 
Telephone Sales Desk: (023) 8049 4333

 or: 

Product Helpline (023) 8049 4344.

A proof of purchase must be provided.
If upon inspection it is found that the fault occurring is due to defective materials or 
workmanship, repairs will be carried out free of charge. This guarantee period covering 
parts/labour is 12 months from the date of purchase except where tools are hired out when 
the guarantee period is 90 days from the date of purchase. The guarantee is extended to 
24 months for parts only. This guarantee does not apply to normal wear and tear, nor does 
it cover any damage caused by misuse, careless or unsafe handling, alterations, accidents, 
or repairs attempted or made by any personnel other than the authorised Draper warranty 
repair agent.

Note:

 If the tool is found not to be within the terms of warranty, repairs and carriage 

charges will be quoted and made accordingly.
This guarantee applies in lieu of any other guarantee expressed or implied and variations 
of its terms are not authorised.
Your Draper guarantee is not effective unless you can produce upon request a dated 
receipt or invoice to verify your proof of purchase within the guarantee period.
Please note that this guarantee is an additional benefit and does not affect your statutory 
rights.

Draper Tools  Limited.

Summary of Contents for DA6/181





















Reviews: