Draper D13/5A, Instructions Manual

Page: 14 / 20

2. The table can be tilted right or left by
loosening the table locking bolt Fig.18.
4. A tilt scale guide Fig.20. is provided on the
table bracket casting to indicate the degree of
tilt. A cursor line is also provided on the
table to line up with the scale .
3. Tilt table to the desired angle and tighten bolt
Fig.19.
1. The table Fig.17. can be raised or lowered
on the drill press column by loosening the
table clamp handle Fig.17. Move the table
to the desired position on the column and
tighten table clamp handle .
TABLE ADJUSTMENT
A
E
A
B
E
F
G
Fig.17.
Fig.18.
Fig.19.
Fig.20.
B
- 14 -
A
G
B
B
E
F