OPERATION & USE
Fig.3
Fig.4
- 7 -
SWITCH
The on/off switch
✰✌
is fitted with a safety button
✱✌
so that it is not possible to start the saw by accident.
To start the saw press the safety button
✱✌
then
depress button
✰✌
and hold. The saw will stop when
switch
✰✌
is released
(Fig.3)
.
CUTTING DEPTH SETTING
For a clean perfect cut, it is recommended to adjust
the cutting depth according to the wood thickness by
having the saw blade jut out through the material by
the height of a tooth.
In order to adjust the cutting depth, loosen the wing
nut
✳✌
and move the machine upwards or
downwards
(Fig.4)
.
CUTTING ANGLE SETTING
It is possible to cut vertically and with an inclination
of up to 45º. Angle adjustment is set by loosening
wing nut
✴✌
and according to the scale printed on
the base
(Fig.5)
.
RIVING KNIFE
The riving knife
✵✌
avoids the saw blade from
binding/seizing during cutting operations and it must
always be used for safety purposes. The machine is
supplied with the riving knife adjusted. When
mounting a new saw blade, follow the following steps
for re-adjustment:
Raise the mobile guard
✪✌
and loosen screw
✶✌
.
Move the riving knife so the arc of the knife is 2-3mm
(5mm max.) from the saw blade tips
✺✌
. Raise or
lower the knife so it is 2-3mm (5mm max.) higher
than the base of the blade
✻✌
. Tighten screw
✶✌
(Fig.6)
.
PARALLEL CUTTING GUIDE
For parallel cuts, use cutting guide
✷✌
. Cutting width
is adjusted by loosening knob
✹✌
sliding guide to
required position indicated by the scale on the guide.
Tighten wing nut
✹✌
(Fig.7)
.
CUTTING INDICATION
Item 13
(Fig.1)
is used as cutting indication with the
blade in horizontal position. It is advisable to perform
test cuts.
✰✌
Fig.5
Fig.6
Fig.7
✱✌
✳✌
✴✌
✪✌
✶✌
✵✌
✹✌
✷✌
✺✌
5mm max.
5mm max.
✻✌