- 6 -
OPERATION & USE
Make sure that the mains voltage matches the
voltage stated on the machines rating plate.
BLADE REMOVAL AND FITTING
Set the base plate to the highest position (maximum
depth of cut).
Open the mobile lower blade guard
✪✌
. Using a
30mm open ended spanner on the flats of the blade
flange
✫✌
undo and remove the flange screw
✬✌
with the hex key supplied
✭✌
and remove blade
flange
✫✌
(Fig.2)
.
Change the blade ensuring that the arrow on the
blade points in the same rotation as the arrow on the
upper blade guard.
Refit the blade flange
✫✌
and flange screw
✬✌
and
tighten
(Fig.2)
.
Note
If a blade of a slightly different diameter is fitted the
riving knife will have to be adjusted. See Riving Knife
below.
IMPORTANT
When changing or fitting a blade always have the
depth of cut set at maximum.
Fig.2
✭✌
✫✌
✬✌
✪✌