- 4 -
OPERATION & USE
GAS FUELLING (Fig.2).
NOTE: The glue gun is supplied empty of
gas. (Butane gas refill not supplied).
With the gas control valve in the off
position and the gun in the up turned
position, insert the butane nozzle into the
refill valve
✪✌
. Observe any warnings on
the butane canister. Push down on the
canister to fill and release when full.
Butane will escape around the valve when
the gun is full.
IGNITION (Figs.3 and 4).
The gas control wheel
✫✌
is fitted with a
safety lock to prevent accidental gas loss.
To operate, initially lift and twist the
wheel. Gas will be heard escaping. Adjust
as necessary. To light, push and hold
ignition button
✬✌
for 5-10 seconds. The
area seen through gap
✭✌
will begin to
glow as it heats up.
NOTE: Do not block the air vents during
operation.
The glue gun and butane must be at room
temperature to ignite correctly.
To switch off, rotate the gas control wheel
until the safety lock is initiated, and allow
to cool down.
Do not leave unattended until cool.
Fig.2.
Fig.3.
Fig.4.
✪✌
✫✌
✭✌
✬✌
