Draper 99074 Manual Download Page 9

- 9 -

7.2 WHAT´S IN THE BOX?

As well as the compressor there are parts not fitted or attached to it.

(7)

(10)

(8)

(9)

(11)

7. UNPACKING AND CHECKING

This air compressor comes with 1/4” PCL type quick connect coupler, two extension coil hoses 

and a tyre inflation gun. One end of the extension coil hose is equipped with a 1/4” PCL type quick 

connect coupler, the other end is equipped with a 1/4” PCL type quick connect stud. The tyre 

inflation gun comes with a 1/4” PCL type quick connect stud, pressure gauge, rubber hose, 

bleeder valve and tyre chuck. 
Warning!

 

●  Hoses are 7.6m working length. Using them beyond this measurement will cause additional 

stress particularly on the connections. DO NOT OVER-STRETCH THESE HOSES.

(7)

  Tyre inflator

(8)

  Metal needle  

 adaptor

(9)

  Plastic adaptors

(10)

 Coil hoses

(11)

  Carry bag

7.1 PACKAGING

Carefully remove the product from the packaging and examine it for any sign of damage that may 

have happened during shipping. Lay the contents out and check them against the parts shown 

below. If any part is damaged or missing please contact the Draper help line (the telephone 

number appears on the Title page) and do not attempt to use the tool.
The packaging material should be retained at least during the warranty period in case the tool 

needs to be returned for repair. 
Warning!

 

●  Some of the packaging materials used may be harmful to children. Do not leave any of these 

materials in the reach of children.

●  If any of the packaging is to be thrown away, make sure they are disposed of correctly 

according to local regulations.

Summary of Contents for 99074

















Reviews: