4. Product Introduction
Stock No.:
98921
Part No.:
DSWP1000A
Usage:
Clear water
Rated voltage:
220–240V AC
Rated frequency:
50Hz
Rated input:
1,000W
Max. particle size:
1mm
Max. duty cycle:
4h on, 4h off
Output adaptor apertures (exterior):
32, 25mm
Max. flow rate:
5,500L/h
Max. head height:
40m
Max. operating depth:
7m
Max. water temperature:
35°C
Min. water level:
40mm*
Power cable length:
10m
IP rating:
IPX8
Appliance class:
Class I
Weight:
8kg
*This is the minimum level of water above the base of the
pump at which the pump can safely operate. However,
Draper Tools
strongly recommends that the pump
remains completely submerged throughout the entire
operation. Operating the pump when it is not submerged
may compromise the motor and housing.
– 5 –
EN
4.2 Specification
4.1 Scope
This product is a deep-water pump designed for
submersion within the reservoir and is suitable for
transferring clean water only in areas requiring a large
head or high pressure. This pump is suitable for
permanent and semi-permanent installations that do not
require the pump to be in constant use, for example in
locations where it is necessary to maintain a given level of
water, or for temporary or emergency installations to lower
excessively high water levels.
Clear water pumps are suitable for use in pumping clear
water from pools and garden ponds where the water is not
muddied by sediment or algae and contains no visible
particles. Draper Tools recommends that clear water
pumps are used
ONLY in reservoirs that are completely
free from debris.
Part of our core range, this product is suitable for regular
use by enthusiasts and tradespersons alike.
Important: This product is NOT suitable for continuous
use, such as water circulation (water features, etc.). Using
it in this way will invalidate your product warranty.
Important: Draper Tools strongly recommends this
product is used to lower water levels
ONLY and NOT for
completely draining reservoirs. We recommend that the
pump remains
COMPLETELY submerged throughout the
entire operation to ensure that the motor remains cool and
does not overheat. If the motor overheats, it may become
damaged and may compromise the structure of the pump.
Important: This product is NOT suitable for permanent
installation in fish ponds or any other reservoir containing
water mixed with chemicals or other acidic contaminants,
including salt water.
Where the pump is used temporarily in a fish pond, Draper
Tools
STRONGLY recommends that the fish are removed
for the duration of operation or a guard is placed around
the pump inlet to prevent fish from being drawn into the
mechanism. Guards must not prevent water from being
drawn into the pump or obstruct the impeller in any way.
DO NOT use this product in fish ponds where the fish are
small enough to access the impeller.
WARNING! This product is not a toy and must be
respected.
Read this manual in full before attempting to assemble,
operate or maintain the product, and retain it for later
use.
