manualshive.com logo in svg

Draper 87680, Instructions Manual

Share
Download
Draper 87680 Instructions Manual Download Page 19

11. MAINTENANCE

11.9 RISK OF MOVING PARTS

11.10 RISK FROM LIFTING

HAZARD

Contact with moving 
parts can result in 
serious injury.

WHAT COULD HAPPEN

HOW TO PREVENT IT

The water pump contains parts which 
rotate at high speed during operation. 
These parts are covered by guarding to 
prevent injury.

Never operate water pump with guarding 
or cover plates removed. Avoid wearing 
loose fitting clothing or jewellery which 
could be caught by moving parts.

HAZARD

Lifting a very heavy 
object.

WHAT COULD HAPPEN

HOW TO PREVENT IT

Serious injury can result from attempting to 
lift too heavy an object.

When lifting, always keep the object you 
are lifting near the vertical axis of your 
body. DO NOT use you back to lift heavy 
loads. Both people should crouch down, 
grab the underside of unit and use your 
legs to carry the weight. Keep the object as 
near the centre of your body’s gravity as 
possible. Avoid twisting your bodies when 
carrying the unit; instead, turn your whole 
body using your feet.

19

Summary of Contents for 87680

























Reviews:

No comments

Brands by name

Popular brands

Load more brands