background image

 

    

DRAPER TOOLS LIMITED,

Hursley Road, Chandler's Ford, Eastleigh, Hants. SO53 1YF. U.K.

Helpline: (023) 8049 4344.

Sales Desk: (023) 8049 4333.

General Enquiries: (023) 8026 6355.

Fax: (023) 8026 0784.

©Published by Draper Tools Ltd.

No part of this publication may be reproduced,

stored in a retrieval system or transmitted in

any form or by any means, electronic, mechanical

photocopying, recording or otherwise without prior

permission in writing from Draper Tools Ltd.

YOUR DRAPER STOCKIST

http://www.draper.co.uk
e-mail: [email protected]

 

    

25 & 50 LITRE

COMPRESSORS

 

STOCK Nos. 77760

 PART Nos.DA25/190

77759

DA50/190

GENERAL INFORMATION

This manual has been compiled by Draper Tools and is an integrated part of the product with which it is enclosed 
and should be kept with it for future references.
This manual describes the purpose for which the product has been designed and contains all the necessary 
information to ensure its correct and safe use. We recommend that this manual is read before any operation or, 
before performing any kind of adjustment to the product and prior to any maintenance tasks. By following all the 
general safety instructions contained in this manual, it will ensure both product and operator safety, together with 
longer life of the tool itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the 
product.
Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tools 
policy of continuous improvement determines the right to make modifications without prior warning.

01/2005

• INSTRUCTIONS •

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE

SAFE AND EFFECTIVE USE OF THIS TOOL.

Summary of Contents for 77759

















Reviews: