8. PREPARING THE FENCE POST AUGER
8.1 ATTACHING THE AUGER BIT –
FIGS. 1 - 2
Warning! This machine must be operated with two
hands at all times.
Note: Do not attempt to connect non-genuine
accessories as it may result in injury or cause
damage to this machine.
8.2 FUELLING – FIG. 3
This Draper petrol product is powered by an engine
which MUST be filled with unleaded fuel MIXED
with 2-stroke oil. Failure to add oil or incorrectly
mixing the oil and fuel can result in running
problems or engine failure. Any machine returned
under warranty which is found to have failed due to
a lack of lubrication will be considered a chargeable
repair.
Only use fresh, clean, and good quality unleaded
fuel mixed with synthetic 2-stroke oil in a ratio of
25:1.
The mixing container
(18)
is marked on the sides to
allow the ratio of oil to be measured prior to mixing.
Fuel quality degrades rapidly: Avoid storing fuel by
mixing only what you require.
Using fuel that has degraded will cause starting/
running problems.
Use funnel
(19)
supplied to prevent fuel spillage.
Never refuel the engine inside a building
– 11 –
1
FIG.
2
FIG.
3
FIG.
(14)
(19)
(18)
(15)
